MAX912CPE+ Overview
To facilitate transportation, it comes packaged in 16-DIP (0.300, 7.62mm) .There is a comparator of type Complementary, TTL output on this device.The chip is packaged with Tube .The device is designed with 16 terminations.The chip belongs to Comparator .A comparator supplied with 5V voltage can complete many demanding tasks.Electronic comparator can be classified as a with Latch chip.The board includes 16 pins.Electronic comparator is recommended to mount using type Through Hole .If you want to avoid malfunction, you should set the operating temperature to 0°C~70°C .This comparator has 16 pins.In case you are looking for more pin-to-pin solutions, you may want to search MAX912 .A quiescent current of 10mA is displayed by this comparator.Mounting on PCBs or other boards is easy with the Through Hole .Normal operation of the device requires 10mA supply current.If the current supply exceeds 10mA , the comparator might be damaged.The voltage formula shows that the part has a voltage gain of 70.88dB .
MAX912CPE+ Features
Complementary, TTL output capability
with Latch IC
Operates under 0°C~70°C
Quiescent Current: 10mA
Voltage Gain: 70.88dB
MAX912CPE+ Applications
There are a lot of Maxim Integrated
MAX912CPE+ linear comparators applications.
- Analog front end
- Power management
- Point of load regulators
- DC/DC and AC/DC power supplies
- System control and monitoring
- Wearable Devices
- Mobile Phones and Tablets
- Battery-Powered Electronics
- General Purpose Low Voltage Applications
- Limit Comparators
