MAX9053AEUB+T Overview
In order to facilitate transportation, it is packaged in 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) .A comparator with a CMOS, Push-Pull, Rail-to-Rail, TTL output is used here.This package has been designed with Tape & Reel (TR) .The comparator has 10 terminals.The component belongs to the Comparator family of electrical components.In the presence of a 5V voltage, the comparator is capable of accomplishing a variety of demanding tasks.When it comes to types, this comparator is a typical with Voltage Reference .There are a total of 2 elements in it.The device is equipped with 10 pins.Electronic comparator is recommended that the mounting type be Surface Mount .In order to avoid malfunctions, the operating temperature should be set to -40°C~85°C .There are 10 pins on the comparator.If you require more pin-to-pin solutions, search MAX9053 for more options.The comparator displays a quiescent current of 85μA .A Surface Mount is provided for mounting on PCBs or other boards.The nominal supply current of the device should be 60μA for normal use.A current supply greater than 60μA may result in the comparator malfunctioning.Electronic comparator is sufficient to run the device wElectronic comparatorh 3/5V power supplies.There is a maximum current that can be input into the device of 1pA .
MAX9053AEUB+T Features
CMOS, Push-Pull, Rail-to-Rail, TTL output capability
with Voltage Reference IC
Employing 2 elements
Operates under -40°C~85°C
Quiescent Current: 85μA
MAX9053AEUB+T Applications
There are a lot of Maxim Integrated
MAX9053AEUB+T linear comparators applications.
- Battery-Powered Electronics
- General-Purpose Portable Devices
- General-Purpose, Low-Voltage Applications
- Self-diagnostics
- Lithium ion battery monitoring
- Battery management and protection
- Current and voltage sensing
- Analog front end
- Power management
- Point of load regulators
