MAX9018AEKA+T Overview
In order to make transportation easier, it is packaged in SOT-23-8 .A comparator with an output type of CMOS, Open-Drain, Rail-to-Rail is being used.We ship the part through Tape & Reel (TR) .As you can see, the comparator has8 terminals.Electronic comparator is a part of Comparator family.Electronic comparator is capable of performing numerous tasks when powered by 5V voltage.In general, the chip type can be classified as with Voltage Reference .A total of 2 elements can be found in it.A total of 8 pins are included.A Surface Mount mounting type is recommended.A temperature setting of -40°C~85°C should be used for the operating temperature in order to prevent malfunctions.The comparator consists of 8 pins.Alternatively, you may search for MAX9018 to find more pin-to-pin solutions for your specific needs.There is 2.8μA current flowing in this comparator.There is a Surface Mount on the board for mounting to a PCB or other board.Electronic comparator is recommended that the nominal supply current of the device be 2.3μA .A current supply greater than 2.3μA may cause the comparator to malfunction.The device can be run with 5V power supplies.Electronic comparator is possible to input a maximum of 1nA current into the device.Comparator electronics is part of the Beyond-the-Rails™ comparator series.
MAX9018AEKA+T Features
CMOS, Open-Drain, Rail-to-Rail output capability
with Voltage Reference IC
Employing 2 elements
Operates under -40°C~85°C
Quiescent Current: 2.8μA
MAX9018AEKA+T Applications
There are a lot of Maxim Integrated
MAX9018AEKA+T linear comparators applications.
- Current and voltage sensing
- Analog front end
- Power management
- Point of load regulators
- DC/DC and AC/DC power supplies
- System control and monitoring
- Wearable Devices
- Mobile Phones and Tablets
- Battery-Powered Electronics
- General Purpose Low Voltage Applications
