Welcome to Hotenda.com Online Store!

logo
userjoin
Home

MAX8805ZEWEEE+T

MAX8805ZEWEEE+T

MAX8805ZEWEEE+T

Maxim Integrated

Converter, WCDMA PA Power 0.4V~5.5V 260 Cel BOTTOM Specialized Voltage Regulator -40°C~85°C MAX8805 16 Pins 4MHz 16 Terminations 16-UFBGA, WLCSP

SOT-23

MAX8805ZEWEEE+T Datasheet PDF

non-compliant

Technical Specifications

Parameter NameValue
TypeParameter
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 16-UFBGA, WLCSP
Number of Pins 16
Operating Temperature-40°C~85°C
PackagingTape & Reel (TR)
Published 2010
Pbfree Code yes
Part StatusObsolete
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 16
ECCN Code EAR99
Applications Converter, WCDMA PA Power
Additional FeatureALSO OPERATES AS LDO REGULATOR; PWM CONTROL TECHNIQUE ALSO POSSIBLE
Subcategory Switching Regulator or Controllers
Technology BICMOS
Terminal Position BOTTOM
Terminal FormBALL
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Terminal Pitch0.5mm
Base Part Number MAX8805
Pin Count16
Number of Outputs 1
Output Voltage 2.85V
Max Output Current650mA
Operating Supply Voltage5.5V
Input Voltage-Nom 3.6V
Analog IC - Other Type SWITCHING REGULATOR
Voltage - Input 2.7V~5.5V
Output Current650mA
Voltage - Output 0.4V~5.5V
Min Input Voltage 2.7V
Control Mode CURRENT-MODE
Max Input Voltage 5.5V
Control Technique HYSTERETIC CURRENT MODE
Switcher Configuration BUCK
Switching Frequency4MHz
Height Seated (Max) 0.69mm
Length 2.045mm
Width 2.045mm
Radiation HardeningNo
RoHS StatusROHS3 Compliant
In-Stock:2347 items

MAX8805ZEWEEE+T Product Details

MAX8805ZEWEEE+T Overview


A total of 1outputs are supported by this voltage regulator. The rectifier regulator is packaged in 16-UFBGA, WLCSP to facilitate transportation. The power regulator is currently available in Tape & Reel (TR) packages. Volatge output for this voltage controller is 0.4V~5.5V. It has a mounting type of Surface Mount. The shunt regulator is intended for use in applications such as Converter, WCDMA PA Power and others. It is recommended that the operating temperature be set to -40°C~85°C in order to prevent malfunctions. The variable voltage regulator input voltage is designed to be 2.7V~5.5V. It contains terminals with the number 16. The electronic part is widely regarded as a regulator of type SWITCHING REGULATOR. Assuming that the rectifier regulator has 16 pins, the pinout begins from there. If you are looking for pin-to-pin solutions for a specific application, please search MAX8805. There is a Surface Mount on the board for mounting to a PCB or other board. Currently, the power supply regulator has 16 pins. There are other Switching Regulator or Controllersin the industry, such as the voltage controller, which play an important role. The normal operation of the system requires 5.5V operating voltage. There should be 650mA output from the electrical regulator at the moment. Refer to the following extra aspects of this variable voltage regulator: ALSO OPERATES AS LDO REGULATOR; PWM CONTROL TECHNIQUE ALSO POSSIBLE. A voltage greater than 2.7Vis required for this rectifier regulator. A frequency of 4MHzcan be set for the AC voltage regulator. In its maximum configuration, the rectifier regulator produces current 650mA.

MAX8805ZEWEEE+T Features


Widely used in Converter, WCDMA PA Power applications
SWITCHING REGULATOR analog IC
Supply voltage: 5.5V

MAX8805ZEWEEE+T Applications


There are a lot of Maxim Integrated MAX8805ZEWEEE+T Specialized Voltage Regulators applications.

  • Camcorders
  • Cell Phones
  • Precision Point of Load Power Supply
  • Set Top Boxes
  • Point of Load Regulation for High
  • Set Top Box
  • Mobile Radios
  • Two-Way Pagers
  • Chipset/RAM Supplies as Low as 0.5 V
  • Embedded Systems

Get Subscriber

Enter Your Email Address, Get the Latest News