MAX8805ZEWEBE+T Overview
The system supports a total of 1 outputs. For ease of transportation, alternator regulator is packaged in 16-UFBGA, WLCSP. Currently available in Tape & Reel (TR) packages for shipping. This power supply regulator has a general volatge output of 0.4V~5.5V. For easy adaptability, there is a universal mount Surface Mount. It is intended to be used in applications such as Converter, WCDMA PA Power and others. In order to avoid malfunctions, the operating temperature should be set to -40°C~85°C. This external regulator requires a voltage of 2.7V~5.5Vas its input voltage. There are 16terminals on the voltage regulator. In order to find more pin-to-pin solutions, try searching for MAX8805. A Surface Mount is provided for mounting it on PCBs and other boards. 16pins are present on the power regulators. The voltage controller plays an important role in the industry, as do other Switching Regulator or Controllers. For normal operation, there should be 5.5V operating supply voltage applied. It should be showing 600mAas the current output from the external regulator. The alternator regulator requires an input voltage greater than 2.7V. DC voltage regulators can operate at a frequency of 2MHz. A maximum current of 650mAis intended to be produced by the voltage regulator.
MAX8805ZEWEBE+T Features
Widely used in Converter, WCDMA PA Power applications
Supply voltage: 5.5V
MAX8805ZEWEBE+T Applications
There are a lot of Maxim Integrated MAX8805ZEWEBE+T Specialized Voltage Regulators applications.
- Camcorders
- Polymer LEDs (OLED)
- TFT LCD Bias Supplies
- SSTL-2 SSTL-18 and HSTL Termination
- Industrial controls
- GSM Base Station
- Digital TV's
- Memory Termination Regulator for DDR, DDR2, DDR3, and Low Power DDR3/DDR4
- LCD Monitors and TVs
- Notebook Computer System and I/O Bus
