MAX8805ZEWEAA+T Overview
There are a total of 1 outputs supported by the voltage regulator. Transport is made easy with the package of 16-UFBGA, WLCSP. Currently, Tape & Reel (TR) packages are available for shipping. This power supply regulator has a general volatge output of 0.4V~5.5V. The Surface Mount universal mount allows for easy adaptation. There are a number of applications targeted at Converter, WCDMA PA Power. To ensure proper functioning, the operating temperature should be set to -40°C~85°C. The external regulator is designed to operate at a voltage of 2.7V~5.5V. This electronic component contains terminals with a value of 16. As a SWITCHING REGULATOR regulator, the electronic part has received lots of praise. Assuming that the rectifier regulator has 16 pins, the pinout begins from there. In order to find more pin-to-pin solutions, try searching for MAX8805. It has a Surface Mount for mounting on PCB or other boards. A power supply regulator with 16pins is present. It is important to note that other Switching Regulator or Controllers in the industry, such as the voltage controller, also play a significant part. Normal operation requires 5.5V operating supply voltage. It is recommended that the electrical regulator outputs a value of 600mA at the present time. Here are a few extra features of this voltage regulator: ALSO OPERATES AS LDO REGULATOR; PWM CONROL TECHNIQUE ALSO POSSIBLE. The input voltage of this rectifier regulator must be higher than 2.7V. It is possible to switch the voltage controller at a frequency of 2MHz. At its maximum output, voltage regulator produces current 650mA.
MAX8805ZEWEAA+T Features
Widely used in Converter, WCDMA PA Power applications
SWITCHING REGULATOR analog IC
Supply voltage: 5.5V
MAX8805ZEWEAA+T Applications
There are a lot of Maxim Integrated MAX8805ZEWEAA+T Specialized Voltage Regulators applications.
- DAC Controlled High Current Output Stage
- security cameras
- DDR Memory Termination
- Telecom/Datacom
- Low-Voltage
- Distributed power architectures (24 V/48 V bus)
- High-Density Distributed Power Systems
- Motherboard
- SSTL_18, SSTL_15, SSTL_135 and HSTL
- Chipset/RAM Supplies as Low as 0.5 V
