MAX8795AGCJ/V+GB Overview
As a whole, it supports 8 outputs. The rectifier regulator is conveniently packaged in 32-LQFP. Currently, the power regulator is available for shipping in Tray packages. Volatge output for this voltage controller is 2.5V~18V. This Surface Mount mount is universal and can be easily adapted. The shunt regulator is intended for use in applications such as Converter, TFT LCD and others. A temperature setting of -40°C~105°C is recommended to avoid malfunctions. The input voltage for this external regulator is designed to be 2.5V~6V. This part receives much praise as a SWITCHING REGULATOR voltage regulator. For more pin-to-pin solutions, please search MAX8795. The PCB or other board can be mounted using the Surface Mount on it. In this power supply regulator, there are 32 pins. As a rule, 6V operating supply voltage is required for normal operation. It is required that the input voltage be higher than 2.5V. In this case, Automotive, AEC-Q100corresponds to the external regulator's series number. As a maximum, rectifier regulator produces a current of 500mA.
MAX8795AGCJ/V+GB Features
Widely used in Converter, TFT LCD applications
SWITCHING REGULATOR analog IC
Supply voltage: 6V
MAX8795AGCJ/V+GB Applications
There are a lot of Maxim Integrated MAX8795AGCJ/V+GB Specialized Voltage Regulators applications.
- Passive-Matrix LCD Displays
- VoIP phones
- Graphics Card DDR Memory Termination
- Telco central office equipment: xDSL, ISDN, PABX
- Notebook Computers System Bus and I/O
- Point of Load in LCD TV
- Cell Phones
- TFT Active-Matrix LCD Displays
- Memory Termination Regulator for DDR, DDR2, DDR3, and Low Power DDR3/DDR4
- Handheld PC Power
