MAX8677CETG+ Overview
There is a package for Tube in which it can be found.We've included it in the 24-WFQFN Exposed Pad package so that it's easier to use.Mounting type for the device is Surface Mount.It is recommended that the temperature be set to -40°C~85°C TA in order to ensure reliable performance.In order to operate this device, an analog IC of POWER SUPPLY SUPPORT CIRCUIT must be used.The device requires Constant - Programmable current to charge.The related parts of the base part number MAX8677 can be found by following the order of the base part number.It contains a total of 24 terminations.It is equipped with 24 pins.There are various programmable features, such as Current, Timer.As long as it is charged at maximum current, it will be rated as 1.5A.It requires pins 24 to function.The number of available channels is 1.It should be able to run off a battery of 5V.In order for the device to operate properly, the supply voltage should not exceed 6.6V.When the output voltage is 4.2V, high efficiency is possible.As far as this device is concerned, it belongs to the subcategory Power Management Circuits.A supply voltage of 4.1V is suitable for it, because it can operate with a low supply voltage.Amounting is in line with Surface Mount.Vsup (maximum supply voltage) is set in the command to 2mA.The part's power supply is set to a value of 5V.There are several electrical components in the series Smart Power Selector™.Its supply carries 1mA current.Input voltage is limited to 6.6V volts.As a maximum output supply voltage for this operation, the voltage must be set to 4.242V.In the course of operation, the maximum output current is reduced to 1.5A.
MAX8677CETG+ Features
1 channels
Power Management Circuits subcategory
24-WFQFN Exposed Pad package
MAX8677CETG+ Applications
There are a lot of Maxim Integrated
MAX8677CETG+ Battery Chargers ICs applications.
- Golf carts
- Forklift
- Pallet jacks
- Personnel carriers
- Maintenance shops
- Rental fleets
- Truck dealers
- Floor scrubber
- Material handling
- Man lift
