MAX8668ETEU+ Overview
The package Strip is ready to be shipped out.There are total of 4 outputs that are supported by voltage regulator.The switching regulator has 16 terminals that can be found on the side of the switching regulator.There is one important thing to keep in mind when there is a pinout for a switching regulator and that is pin 16.In order to proceed with the relow soldering, it is necessary to allow the temperature to peak at 260-peak.16-shaped pins are used in this voltage regulator.It has a 3.3V voltage output.The input voltage needed for this regulator is ≥ 2.6V.It is possible for this voltage regulator to use a maximum voltage of 5.5V.There should be a 1.2A output from the DC DC Switching Regulator at the moment.In order to maximi1.2Ae current 1.2A, it is designed to generate maximum current.In addition to the voltage regulator DC to DC, other Switching Regulator or Controllers's play a significant role in the industry as well.A Surface Mount is included for mounting it to PCBs or other boards.Lower temperatures than -40°C don't suit it.Use should not be recommended at temperatures higher than 85°C.
MAX8668ETEU+ Features
4 outputs
Peak Reflow Temperature: 260
MAX8668ETEU+ Applications
There are a lot of Maxim Integrated MAX8668ETEU+ Linear Regulator Controllers applications.
- Post Regulation for Switching Supplies
- High-current, current-limited switch
- High Efficiency Linear Regulators
- Graphics Card
- Single Supply Amplifier
- Consumer Electronics
- Monitors
- Low-dropout SMPS post regulator
- VCRs
- Ultrahigh current ultralow dropout voltage regulator
