MAX8614ETD+T Overview
Generally, it supports 2 outputs at a time. In order to facilitate transportation, alternator regulator is packaged in 14-WFDFN Exposed Pad. The power regulator is currently available in Tape & Reel (TR) packages. The output voltage of this voltage controller is Adj up to 24V Adj down to -10V. Surface Mount universial mount for easy adapting. This shunt regulator targets at Converter, CCD and other applications. Ideally, the operating temperature should be set at -40°C~85°C in order to prevent malfunction. This variable voltage regulator is designed to have a voltage input of 3V~5.5V. As a SWITCHING CONTROLLER regulator, the electronic part has received high praise. Find more pin-to-pin solutions by searching MAX8614. In order to mount it on PCBs or other boards, it has a Surface Mount. The power regulators with 14 pins are available. It is necessary to have a voltage of 5.5V for normal operation. There should be a 100mA output from the external regulator at present. The input voltage for this alternator regulator must be greater than 2.7V. There is the possibility of switching the voltage controller at a frequency of 1MHz.
MAX8614ETD+T Features
Widely used in Converter, CCD applications
SWITCHING CONTROLLER analog IC
Supply voltage: 5.5V
MAX8614ETD+T Applications
There are a lot of Maxim Integrated MAX8614ETD+T Specialized Voltage Regulators applications.
- Cell Phones
- Broadband, Networking and Optical
- DDR/DDR2/DDR3 Memory Power Supplies
- Performance DSPs
- MFP
- Telecom/Datacom
- Memory Termination Regulator for DDR, DDR2, DDR3, and Low Power DDR3/DDR4
- Graphics Cards
- Active Termination of GTL and SSTL
- Telecom/Datacom
