MAX8548EUB+ Overview
Capsuled in the 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) package, the switching controller suits most application needs. It is sufficient to generate 1 outputs with this dc motor controller. Packaging for the pmic consists of Tube solid enclosures. With Transistor Driver dc switching's output (s), it is able to handle it. This dc control has a supply voltage and operating voltage of 2.7V~28V. Qualified to work in an dc switcher with -40°C~85°C TA. With this switching controller, you can switch at 100kHz. dc dc regulators can be carried out with Surface Mount. Enable provides dcdc regulator efficient switching control. The switch converters are connected to an analog IC with a SWITCHING CONTROLLER output. A switching converters's terminal (s) sits at the DUAL position. Various 10 terminations. These dc dc converter ics adapt several control methods, including PULSE WIDTH MODULATION. The DC switcher's nominal voltage is 5V. MAX8548 can be used to locate other relevant dc to dc converter ics. 10 pins are present on switching converter. Switching converter is a special type of Switching Regulator or Controllers. It is recommended that the dc dc voltage regulator's minimum input voltage be 2.7V. As determined by the test statistics, the output voltage of DC regulator is 23V. It should be fully noted that the dc to dc regulator only accepts 5.5V input voltage at most. In most cases, the output current of the dc dc regulator will be 15A, so note that when you start the project. A duty cycle set at 95 % ensures voltage regulator dc to dc reliability during power-on and power-off. The Surface Mount makes DC switcher suitable for most applications and prototypes. DC regulators have a maximum frequency of 120kHz. In order for the voltage regulator dc to dc to perform safely and reliably in a circuit, users are advised to apply 28V. There is 1.2mA supply current for it. nominal current supply for this the controllers dc is 1.2mA.
MAX8548EUB+ Features
Transistor Driver Outputs
Switching Frequency: 100kHz
Enable
PULSE WIDTH MODULATION
Max Duty Cycle: 95 %
MAX8548EUB+ Applications
There are a lot of Maxim Integrated MAX8548EUB+ DC to DC converter applications.
- seismic instrument power circuits
- Remotely powered electric motors
- Planers
- Electric heating, lighting
- ATMs
- Production lines
- Alternators
- Thermal power
- Smart grid
- Constant current circuits
