MAX823TEUK Overview
It is mounted through 5 terminals on the power management. There are 1 functions included in this PMIC so that you can refer to them. It is possible to find on this power management a series of 1 channels. There are SOT-23 functions included in this PMIC so that you can refer to them. IC management is specified that the package peak reflow temperature should be 245. During operation, the power ic is supplied with a voltage of 3.3V. Using Surface Mount, IC management is mounted. As a subcategory, this PMIC chip can be categorized as Power Management Circuits. In total, IC powers are 5 pins on the board. 5 pins make up the power management. In order for this PMIC to work correctly, the minimum supply voltage (Vsup) should be greater than 1.2V. Voltage (Vsup) shouldn't exceed 5.5V volts in this PMIC. It is also possible to use other types of IC, such as POWER SUPPLY MANAGEMENT CIRCUIT, in this supervisor. There is a requirement for 3.3V power to power this power management.
MAX823TEUK Features
Minimum supply voltage of 1.2V
MAX823TEUK Applications
There are a lot of Maxim Integrated
MAX823TEUK Voltage Supervisors applications.
- Power distribution systems of CCU
- emergency room
- Medical-specific isolation transformer
- Medical-specific insulation monitor
- Transformer load monitoring equipment
- External alarm
- Display equipment
- DC stabilized power supply module
- Insulation fault location system
- Magnetic resonance imaging
