MAX823REXK+T Overview
As far as the mounting terminals of this voltage supervisor are concerned, it has 5 in total. Strip-packaging is used. There are 1 functions included in this PMIC so that you can refer to them. There are 1 channels on this power managment ic that can be found in a series. There are a number of benefits that this PMIC has in common with other Simple Reset/Power-On Reset manage ics. IC management is specified that the package peak reflow temperature should be 260. The supervisor is always powered by a 3V volt supply. A supply voltage of 1 is used to conduct the PMIC chip. Power management is included in the Surface Mount mount. This power ic can be sub-categorized as Power Management Circuits. Power management has a total of 5 pins. This power management has 5 pins. It is recommended that the minimum supply voltage (Vsup) for this IC management should not be less than 1.2V volts. There should be no more than 5.5V volts of maximum supply voltage (Vsup) in this power management. It is estimated that the voltage supervisor's supply current is 4μA. Supervisors are also additional features, such as [0] for example, which are worth mentioning. The power management must be powered by 3/3.3V volts to function properly.
MAX823REXK+T Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1.2V
4μA operating supply current
MAX823REXK+T Applications
There are a lot of Maxim Integrated MAX823REXK+T Voltage Supervisors applications.
- emergency room
- Urban rail transit weak current power monitoring
- Dash board
- Consumer electronics
- Smartphones
- Detection of phase sequence
- Smart meter
- Analog circuit
- Network equipment
- Efficient information transmission
