MAX8216CPD+ Overview
This power management consists of 14 mounting terminals on which it can be mounted. Packaging is in the form of a Tube. There are 1 functions included in this PMIC so that you can refer to them. Depending on the power managment ic you are looking at, you can find a total of 5 channels. In this PMIC, you can find 14-DIP (0.300, 7.62mm) functions for your reference. Compared to other Multi-Voltage Supervisor products, this PMIC has a lot of benefits to offer. Specifies a reflow peak temperature of 260 for the package during reflow. There is a voltage supply of 5V for the PMIC chip, and the chip conducts at that voltage. During operation, the power ic is supplied with a voltage of 5. By Through Hole, IC management has been mounted. There are a total of 14 pins on power management. 14 pins are present on the power management system. In order for this IC power to function, the supply voltage (Vsup) cannot be less than 2.7V. The maximum supply voltage (Vsup) is not to exceed 11V volts in this IC management. In this case, Through Hole is the recommended mounting type. It is recommended to set the supervisor's temperature to this range: 0°C~70°C TA. There is an output voltage of Open Drain or Open Collector from this supervisor when it is operating. As far as the supply current of the power management is concerned, it is 250μA. If you want to search for similar IC managements of this manufacturer, you can always refer to MAX8216, which is the base power ics number. The maximum supply temperature is 250μA.
MAX8216CPD+ Features
Multi-Voltage Supervisor type
Minimum supply voltage of 2.7V
250μA operating supply current
MAX8216CPD+ Applications
There are a lot of Maxim Integrated MAX8216CPD+ Voltage Supervisors applications.
- Computer applications
- Cloud computing
- Efficient information transmission
- Power distribution systems of CCU
- Magnetic resonance imaging
- Analog circuit
- Electronics installed in the vehicle
- Power distribution systems of operating room
- Kitchen appliances
- Detection of phase loss
