MAX8211MTY Overview
A total of 8 terminals are used to mount this power management. The purpose of this IC management is to provide you with a reference of 1 functions. Power management consists of 1 channels, each of which can be used independently. The purpose of this IC power is to provide you with a reference of TO-99-8 Metal Can functions. There are a lot of similarities between this IC management and other Simple Reset/Power-On Reset products. As specified in the package specification, the peak reflow temperature of the package is set at 245. When 5V is applied to the power ic, it conducts. When 1 is applied to the power ic, it conducts. By Through Hole, IC management has been mounted. A IC power such as this can be classified as a Power Management Circuits power management system. 8 pins are present in total in this power management. Normally, the supply voltage (Vsup) for this PMIC should not be lower than 2V. This IC power should be powered by no more than 16.5V volts of supply voltage (Vsup). The mounting type of the supervisors is Through HoleThe temperature of the supervisors should be set to this range: -55°C~125°C TA. There is an output voltage of Open Drain or Open Collector from this supervisor when it is operating. As far as the supply current of the power management is concerned, it is 15μA. The voltage supervisor requires a power source of 5V volts in order to work correctly. The maximum supply temperature that PMIC chip can work with is 15μA.
MAX8211MTY Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 2V
15μA operating supply current
MAX8211MTY Applications
There are a lot of Maxim Integrated MAX8211MTY Voltage Supervisors applications.
- Analog circuit
- Smartphones
- Electronics installed in the vehicle
- Power distribution systems of CCU
- Telecommunications equipment
- Precision measurement
- Power distribution systems of operating room
- Magnetic resonance imaging
- Detection of phase sequence
- Radar
