MAX8211MSA/PR-T Overview
As you can see, this power management is mounted through 8 terminals. Power management is packaged in a Tape & Reel (TR) way. Please find attached 1 functions for your reference in this IC power. There are 1 channels available on this supervisor, and each channel has a different function. The purpose of this IC power is to provide you with a reference of 8-SOIC (0.154, 3.90mm Width) functions. As with other Simple Reset/Power-On Reset products, this IC management also offers a wide range of benefits. Specifies a reflow peak temperature of 225 for the package during reflow. A supply voltage of 5V is used to conduct the PMIC chip. IC management conducts in a 1-voltage supply. The mount is attached to Surface Mount. Power Management Circuits is a subcategory of this PMIC chip. There are a total of 8 pins on power management. This power management has 8 pins. It is recommended that Vsup should not be less than 2V for this IC power. During this IC power, the maximum supply voltage (Vsup) should not exceed 16.5V volts. In this case, Surface Mount is the recommended mounting type. We recommend setting the supervisors to -55°C~125°C TA degrees. As this power managment ic operates, it is able to produce an output voltage of Open Drain or Open Collector. To find similar IC managements from the manufacturer, you can always search by MAX8211. In order to operate this power management, it requires 5V volts of power. If you want to work with PMIC chip, you will need to supply PMIC chip with a temperature at least of 15μA.
MAX8211MSA/PR-T Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 2V
MAX8211MSA/PR-T Applications
There are a lot of Maxim Integrated MAX8211MSA/PR-T Voltage Supervisors applications.
- Microcontroller system
- Battery-powered equipment
- Important electronics for automotive protection
- Automotive permanent magnet synchronous motors
- Refrigeration
- Embedded computing
- Kitchen appliances
- DSP
- Insulation fault location system
- Leakage protection
