MAX8211CUA+ Overview
As you can see, this power management is mounted through 8 terminals. Packaged in the form of a Tube, power management is easy to use. In this IC power you will find 1 functions for you to refer to. On this supervisor, there is a series of 1 channels that can be found. There are 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) functions included in this PMIC so that you can refer to them. There are a lot of similarities between this IC power and other Simple Reset/Power-On Reset products. In order to ensure a good reflow performance, the package peak reflow temperature must be set at 260. When a supply voltage of 5V is applied to the power ic, it conducts. IC management conducts in a 1-voltage supply. Surface Mount mounts IC management. The power management system can be categorized as a Power Management Circuits chip. There are a total of 8 pins on power management. 8 pins are on the supervisor. IC management can only work with a supply voltage of 2V volts. There should be no more than 16.5V volts of maximum supply voltage (Vsup) in this power management. Surface Mount mounting is recommended. This range of temperature should be set for the supervisors: 0°C~70°C TA. There is an output voltage of Open Drain or Open Collector from this supervisor when it is operating. The power management's supply current is 15μA. A similar IC managements number of the manufacturer can always be found by using MAX8211, the base power ics number. It requires 5V watts of power to operate this voltage supervisor. The maximum supply temperature that PMIC chip can work with is 15μA.
MAX8211CUA+ Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 2V
15μA operating supply current
MAX8211CUA+ Applications
There are a lot of Maxim Integrated MAX8211CUA+ Voltage Supervisors applications.
- Military electronics
- Kitchen appliances
- Multi-voltage system
- DSP
- Satellite navigation
- Microcontroller system
- Power distribution systems of CCU
- Insulation fault location system
- Electric heating appliances
- Radar
