MAX818MESA+T Overview
A total of 8 terminals are used to mount this power management. In terms of packaging, power management follows the Tape & Reel (TR) model. Please refer to this PMIC for 1 functions. There are a total of 1 channels on this supervisor, and they are arranged in a series. There are 8-SOIC (0.154, 3.90mm Width) functions included in this PMIC so that you can refer to them. It is a IC power that shares many benefits with other products from the Battery Backup Circuit line. Packages are specified to have an average peak reflow temperature of 260. During operation, the power ic is supplied with a voltage of 4.5V. Power management conducts at a voltage of 1. By Surface Mount, IC management has been mounted. A IC power such as this can be classified as a Power Management Circuits power management system. Taking into account all of the pins, this power management has a total of 8. This power management has 8 pins. It is recommended that Vsup should not be less than 0V for this IC power. In this PMIC, the maximum supply voltage (Vsup) should not exceed 5.5V volts. In this case, Surface Mount is the recommended mounting type. You should set the supervisor's temperature during -40°C~85°C TA . The supervisor's supply current is specified to 11μA. It is always advisable to use MAX818, the base supervisor number, when searching for similar PMICs from the manufacturer. To operate this power management, you will need at least 5V volts of power.
MAX818MESA+T Features
Battery Backup Circuit type
Minimum supply voltage of 0V
11μA operating supply current
MAX818MESA+T Applications
There are a lot of Maxim Integrated MAX818MESA+T Voltage Supervisors applications.
- Transformer load monitoring equipment
- Electronics installed in the vehicle
- Urban rail transit weak current power monitoring
- Cloud computing
- Dash board
- Electric heating appliances
- Automotive permanent magnet synchronous motors
- Smartphones
- Battery cars
- Unattended substation automation
