Name: MAX816EPA+
Brand: Maxim Integrated
SKU: MAX816EPA+
Price: 19.74000 USD
Availability: InStock

Technical Specifications

Parameter Name	Value
Type	Parameter
Factory Lead Time	6 Weeks
Mount	Through Hole
Mounting Type	Through Hole
Package / Case	8-DIP (0.300, 7.62mm)
Number of Pins	8
Operating Temperature	-40°C~85°C TA
Packaging	Tube
Published	2006
JESD-609 Code	e3
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	8
ECCN Code	EAR99
Type	Simple Reset/Power-On Reset
Terminal Finish	Matte Tin (Sn)
Additional Feature	MANUAL RESET INPUT
Subcategory	Power Management Circuits
Max Power Dissipation	727mW
Technology	CMOS
Terminal Position	DUAL
Peak Reflow Temperature (Cel)	260
Number of Functions	1
Terminal Pitch	2.54mm
Base Part Number	MAX816
Output	Push-Pull, Push-Pull
Pin Count	8
Number of Channels	1
Max Supply Voltage	5.5V
Min Supply Voltage	1.2V
Operating Supply Current	85μA
Max Supply Current	85μA
Adjustable Threshold	YES
Watchdog Timer	No
Reset	Active High/Active Low
Voltage - Threshold	Adjustable/Selectable
Number of Voltages Monitored	1
Reset Timeout	140ms Minimum
Height Seated (Max)	4.572mm
Length	9.375mm
Width	7.62mm
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

MAX816EPA+ Product Details

MAX816EPA+ Overview

It is mounted through 8 terminals on the power management. This power ic is packaged in a way that looks like a Tube. Please refer to this PMIC for 1 functions. There are a total of 1 channels on this supervisor, and they are arranged in a series. Please find attached 8-DIP (0.300, 7.62mm) functions for your reference in this IC power. There are a lot of similarities between this IC management and other Simple Reset/Power-On Reset products. Specifies a reflow peak temperature of 260 for the package during reflow. There is a voltage supply of 1 for the PMIC chip, and the chip conducts at that voltage. The power management is mounted by a Through Hole-axis. A IC power such as this can be classified as a Power Management Circuits power management system. It has a total of 8 pins that are attached to IC management. 8 pins make up the power management. It is recommended that the minimum supply voltage (Vsup) for this IC management should not be less than 1.2V volts. Voltage (Vsup) shouldn't exceed 5.5V volts in this PMIC. The mounting type of the supervisors is Through HoleYou should set the supervisor's temperature during -40°C~85°C TA . While in operation, this supervisor has a voltage output of Push-Pull, Push-Pull. It is estimated that the voltage supervisor's supply current is 85μA. Additionally, IC management are a variety of features, for example [0], to name a few. It is always advisable to use MAX816, the base supervisor number, when searching for similar PMICs from the manufacturer. At most, voltage supervisor can operate at a supply temperature of 85μA.