MAX815NCPA+ Overview
There are 8 mounting terminals on the voltage supervisor, each of which has a different function. This power ic is packaged in a way that looks like a Tube. To assist you, this IC power includes 1 functions. There are 1 channels on this power managment ic that can be found in a series. For your reference, this PMIC includes a list of 8-DIP (0.300, 7.62mm) functions. Compared to other Simple Reset/Power-On Reset products, this PMIC has a lot of benefits to offer. As specified in the package specification, the peak reflow temperature of the package is set at 260. In a 4.6V supply voltage, the power management conducts. Power management conducts at a voltage of 1. The mount is attached to Through Hole. Power Management Circuits is a subcategory of this PMIC chip. There are a total of 8 pins on power management. Pin count of the power management is 8. In order for this IC power to function, the supply voltage (Vsup) cannot be less than 1V. The maximum supply voltage (Vsup) in this PMIC should not exceed 5.5V volts. Through Hole is the recommended mounting type. Temperature setting for the supervisors should be 0°C~70°C TA. As this power managment ic operates, it is able to produce an output voltage of Push-Pull, Totem Pole. For this power management, there is an 75μA volt supply current. For similar manage ics search of the manufacturer, you can always refer to MAX815, the base PMIC number. If you want to work with PMIC chip, you will need to supply PMIC chip with a temperature at least of 75μA.
MAX815NCPA+ Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
75μA operating supply current
MAX815NCPA+ Applications
There are a lot of Maxim Integrated MAX815NCPA+ Voltage Supervisors applications.
- Battery cars
- Multi-voltage system
- DSP
- Leakage protection
- DC stabilized power supply module
- Urban rail transit weak current power monitoring
- Leakage current detection
- Insulation fault location system
- Unattended substation automation
- Microcontroller system
