MAX815LEPA+ Overview
It is mounted through 8 terminals on the power management. There is a Tube-packaging method applied to IC management. In this IC power you will find 1 functions for you to refer to. A series of 1 channels can be found on this supervisor. In this PMIC, you can find 8-DIP (0.300, 7.62mm) functions for your reference. It is a IC power that shares many benefits with other products from the Simple Reset/Power-On Reset line. Packages are specified to have an average peak reflow temperature of 260. When 4.75V is applied to the power ic, it conducts. IC management is possible to find a succession of 1 voltages that have been checked. By Through Hole, IC management has been mounted. As a subcategory, this PMIC chip can be categorized as Power Management Circuits. In total, the power management has 8 pins in it. 8 pins make up the power management. In order for this PMIC to work correctly, the minimum supply voltage (Vsup) should be greater than 1.2V. There should be no more than 5.5V volts of maximum supply voltage (Vsup) in this power management. The recommended mounting type is Through Hole. The temperature of the supervisors should be set to this range: -40°C~85°C TA. While in operation, this supervisor has a voltage output of Push-Pull, Totem Pole. The supervisor's supply current is specified to 85μA. You can always use MAX815, the base supervisor number, to search for similar PMICs of the manufacturer. A maximum supply temperature of 85μA can be used with this power management.
MAX815LEPA+ Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1.2V
85μA operating supply current
MAX815LEPA+ Applications
There are a lot of Maxim Integrated MAX815LEPA+ Voltage Supervisors applications.
- Microcontroller system
- Power distribution systems of CCU
- Solar power charger
- Refrigeration
- Transformer load monitoring equipment
- Embedded computing
- Stable power system
- Utility meter
- DVR
- Power distribution systems of ICU
