MAX810TEUR+T10 Overview
As far as the mounting terminals of this voltage supervisor are concerned, it has 3 in total. A Tape & Reel (TR) package is used to package the power management. Please refer to this PMIC for 1 functions. There are 1 channels on this power managment ic that can be found in a series. For your reference, this PMIC includes a list of TO-236-3, SC-59, SOT-23-3 functions. This IC power shares lots of benefits with other Simple Reset/Power-On Reset products. Specifies a reflow peak temperature of 260 for the package during reflow. When a supply voltage of 3.3V is applied to the power ic, it conducts. In a 1 supply voltage, the PMIC chip conducts. Surface Mount mounts power management on the wall. There is a subcategory of this power ic known as Power Management Circuits. The total number of pins on this power management is 3. 3 pins are on the supervisor. There should be a minimum voltage supply (Vsup) of 1.2V for this PMIC. This IC power should be powered by no more than 5.5V volts of supply voltage (Vsup). Power management' mounting is recommended to be done with the Surface Mount type of mounting. The supervisors should be set to the following temperature: -40°C~105°C TA. The output voltage of this power managment ic during operation is Push-Pull, Totem Pole. The supply current of the power management is 17μA. You can always use MAX810, the base supervisor number, to search for similar PMICs of the manufacturer.
MAX810TEUR+T10 Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1.2V
17μA operating supply current
MAX810TEUR+T10 Applications
There are a lot of Maxim Integrated MAX810TEUR+T10 Voltage Supervisors applications.
- Power distribution systems of operating room
- Personal computers
- Data storage applications
- Detection of phase imbalance
- DC stabilized power supply module
- Efficient information transmission
- Military electronics
- Smart meter
- Embedded computing
- Display equipment
