MAX809SEUR+T10 Overview
As you can see, this power management is mounted through 3 terminals. Packaging is in the form of a Tape & Reel (TR). In this PMIC, you can find 1 functions for your reference. This power managment ic consists of 1 channels, each of which can be used independently. Please refer to power management for TO-236-3, SC-59, SOT-23-3 functions. Several of the benefits of this PMIC are also shared by other Simple Reset/Power-On Reset products. As specified in the package specification, the peak reflow temperature of the package is set at 260. When 3.3V is applied to the power ic, it conducts. A supply voltage of 1 is used to conduct the PMIC chip. The power management is mounted by Surface Mount. A IC power such as this can be classified as a Power Management Circuits power management system. The total number of pins on this power management is 3. Pin count of the power management is 3. Supply voltage (Vsup) should be at least 1.2V for this power management. It is recommended that the maximum supply voltage (Vsup) in this IC power be no more than 5.5V volts. In this case, Surface Mount is the recommended mounting type. The supervisors should be set to the following temperature: -40°C~105°C TA. As a result of this supervisor's operation, the output voltage is Push-Pull, Totem Pole. The supervisor's supply current is specified to 17μA. A similar IC managements number of the manufacturer can always be found by using MAX809, the base power ics number.
MAX809SEUR+T10 Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1.2V
17μA operating supply current
MAX809SEUR+T10 Applications
There are a lot of Maxim Integrated MAX809SEUR+T10 Voltage Supervisors applications.
- Sensitive sensors
- Data storage applications
- Set top box
- Automotive permanent magnet synchronous motors
- Network equipment
- DC stabilized power supply module
- Analog circuit
- Smartphones
- Transformer load monitoring equipment
- Detection of phase loss
