MAX805LCSA+T Overview
A total of 8 terminals are used to mount this power management. Power management is packaged in a Tape & Reel (TR) way. There are 1 functions included in this PMIC so that you can refer to them. It is possible to find on this power management a series of 1 channels. IC management is packaged as a 8-SOIC (0.154, 3.90mm Width) package. There are a lot of similarities between this IC power and other Battery Backup Circuit products. Specifies a reflow peak temperature of 260 for the package during reflow. IC management conducts in a 5V-voltage supply. Power management conducts at a voltage of 1. Surface Mount mounts power management on the wall. The power management system can be categorized as a Power Management Circuits chip. The total number of pins on this power management is 8. 8 pins are on the supervisor. In order for this IC power to function, the supply voltage (Vsup) cannot be less than 1.1V. It is recommended that the maximum supply voltage (Vsup) in this IC power be no more than 5.5V volts. Power management recommends the Surface Mount mounting type. This range of temperature should be set for the supervisors: 0°C~70°C TA. As this power managment ic operates, it is able to produce an output voltage of Push-Pull, Totem Pole. There are other features such as WATCHDOG TIMER, POWER-FAIL COMPARATOR, BACKUP-BATTERY SWITCHOVER to name a few. It is always advisable to use MAX805, the base supervisor number, when searching for similar PMICs from the manufacturer. The voltage supervisor requires a power source of 5V volts in order to work correctly.
MAX805LCSA+T Features
Battery Backup Circuit type
Minimum supply voltage of 1.1V
MAX805LCSA+T Applications
There are a lot of Maxim Integrated MAX805LCSA+T Voltage Supervisors applications.
- Digitally controlled LDO regulators circuit
- Unattended substation automation
- Utility meter
- Smart meter
- Radar
- External alarm
- Efficient information transmission
- emergency room
- Leakage protection
- Military electronics
