MAX802REPA+ Overview
There are 8 terminals connected to this power management, which makes it easy to mount. The purpose of this IC management is to provide you with a reference of 1 functions. It is possible to find on this power management a series of 1 channels. There are 8-DIP (0.300, 7.62mm) functions included in this PMIC so that you can refer to them. With power management, you get a lot of benefits that you won't find in other Battery Backup Circuit products. In order to ensure a good reflow performance, the package peak reflow temperature must be set at 260. In a 1 supply voltage, the PMIC chip conducts. The power management system can be categorized as a Power Management Circuits chip. In total, IC powers are 8 pins on the board. Power management recommends the Through Hole mounting type. The temperature of the supervisors should be set to this range: -40°C~85°C TA. Power management has an output of Push-Pull, Totem Pole during operation. It requires 3/5V watts of power to operate this voltage supervisor.
MAX802REPA+ Features
Battery Backup Circuit type
MAX802REPA+ Applications
There are a lot of Maxim Integrated MAX802REPA+ Voltage Supervisors applications.
- Urban rail transit weak current power monitoring
- Battery cars
- Important electronics for automotive safety
- Personal computers
- Magnetic resonance imaging
- Power distribution systems of CCU
- Detection of phase imbalance
- Leakage protection
- Insulation fault location system
- Medical-specific isolation transformer
