Name: MAX802LESA
Brand: Maxim Integrated
SKU: MAX802LESA
Availability: InStock

Technical Specifications

Parameter Name	Value
Type	Parameter
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	8-SOIC (0.154, 3.90mm Width)
Number of Pins	8
Weight	186.993455mg
Operating Temperature	-40°C~85°C TA
Packaging	Tube
Published	2015
JESD-609 Code	e0
Pbfree Code	no
Part Status	Obsolete
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	8
ECCN Code	EAR99
Type	Battery Backup Circuit
Terminal Finish	Tin/Lead (Sn/Pb)
Subcategory	Power Management Circuits
Max Power Dissipation	471mW
Technology	CMOS
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	245
Number of Functions	1
Supply Voltage	5V
Base Part Number	MAX802
Output	Push-Pull, Totem Pole
Pin Count	8
Power Supplies	5V
Number of Channels	1
Max Supply Voltage	5.5V
Min Supply Voltage	1.2V
Operating Supply Current	500μA
Max Supply Current	500μA
Adjustable Threshold	NO
Watchdog Timer	Yes
Reset	Active Low
Voltage - Threshold	4.65V
Number of Voltages Monitored	1
Reset Timeout	140ms Minimum
Min Reset Threshold Voltage	4.5V
Max Reset Threshold Voltage	4.75V
Undervoltage Threshold	4.5V
Overvoltage Threshold	4.75V
Reset Delay Time	280 ms
Height	1.5mm
Length	5mm
Width	4mm
Radiation Hardening	No
RoHS Status	Non-RoHS Compliant

MAX802LESA Product Details

MAX802LESA Overview

There are 8 mounting terminals on the voltage supervisor, each of which has a different function. In terms of packaging, power management follows the Tube model. Please refer to this PMIC for 1 functions. It is possible to find on this power management a series of 1 channels. Please refer to power management for 8-SOIC (0.154, 3.90mm Width) functions. Several of the benefits of this PMIC are also shared by other Battery Backup Circuit products. According to the specification, the package's peak reflow temperature is specified to be 245. A supply voltage of 5V is used to conduct the PMIC chip. A supply voltage of 1 is used to conduct the PMIC chip. The mount is attached to Surface Mount. There is a subcategory called Power Management Circuits for this power management. 8 pins are present in total in this power management. Pin count of the power management is 8. I should note that the minimum supply voltage (Vsup) for this IC management should be at least 1.2V, which is the minimum supply voltage that should be applied. The maximum supply voltage (Vsup) in this PMIC should not exceed 5.5V volts. Surface Mount mounting is recommended. This power management is the recommended temperature range for the supervisors: -40°C~85°C TA. While this power management is operating, it will output Push-Pull, Totem Pole as the output voltage. The power management's supply current is 500μA. You can always use MAX802, the base supervisor number, to search for similar PMICs of the manufacturer. In order to operate this power management, it requires 5V volts of power. A maximum supply temperature of 500μA can be used with this power management.