MAX801MCSA+T Overview
As you can see, this power management is mounted through 8 terminals. A Tape & Reel (TR) package is used to package the power management. Power management is possible to find a series of 1 functions. There are 1 channels on this power managment ic that can be found in a series. Please find attached 8-SOIC (0.154, 3.90mm Width) functions for your reference in this IC power. This IC power shares lots of benefits with other Battery Backup Circuit products. The package peak reflow temperature is specified to be 260. When 5V is applied to the power ic, it conducts. When a supply voltage of 1 is applied to the power ic, it conducts. Surface Mount mounts power management on the wall. There is a subcategory called Power Management Circuits for this power management. There are a total of 8 pins on power management. 8 pins make up the power management. I should note that the minimum supply voltage (Vsup) for this IC management should be at least 0V, which is the minimum supply voltage that should be applied. Voltage (Vsup) shouldn't exceed 5.5V volts in this PMIC. A Surface Mount mounting type is recommended. It is recommended that the supervisor be set to this temperature: 0°C~70°C TA. It is estimated that the voltage supervisor's supply current is 68μA. Supervisors are also additional features, such as [0] for example, which are worth mentioning. You can always use MAX801, the base supervisor number, to search for similar PMICs of the manufacturer. To operate this power management, you will need at least 5V volts of power.
MAX801MCSA+T Features
Battery Backup Circuit type
Minimum supply voltage of 0V
68μA operating supply current
MAX801MCSA+T Applications
There are a lot of Maxim Integrated MAX801MCSA+T Voltage Supervisors applications.
- Data storage applications
- Household appliances
- WiFi router
- Detection of phase sequence
- Utility meter
- Precision measurement
- Sensitive sensors
- Dash board
- Power distribution systems of ICU
- Important electronics for automotive safety
