Name: MAX795TCSA+
Brand: Maxim Integrated
SKU: MAX795TCSA+
Price: 13.54000 USD
Availability: InStock

Technical Specifications

Parameter Name	Value
Type	Parameter
Factory Lead Time	6 Weeks
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	8-SOIC (0.154, 3.90mm Width)
Number of Pins	8
Operating Temperature	0°C~70°C TA
Packaging	Tube
Published	2011
JESD-609 Code	e3
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	8
ECCN Code	EAR99
Type	Battery Backup Circuit
Terminal Finish	Matte Tin (Sn)
Subcategory	Power Management Circuits
Max Power Dissipation	471mW
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	1
Supply Voltage	3.3V
Base Part Number	MAX795
Output	Open Drain or Open Collector
Pin Count	8
Power Supplies	3.3/5V
Number of Channels	2
Max Supply Voltage	5.5V
Min Supply Voltage	1V
Operating Supply Current	49μA
Adjustable Threshold	NO
Watchdog Timer	No
Reset	Active Low
Voltage - Threshold	3.075V
Number of Voltages Monitored	1
Reset Timeout	140ms Minimum
Supply Current-Max (Isup)	0.07mA
Height	1.5mm
Length	5mm
Width	4mm
REACH SVHC	Unknown
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

MAX795TCSA+ Product Details

MAX795TCSA+ Overview

A total of 8 terminals are used to mount this power management. Packaged in the form of a Tube, power management is easy to use. In this IC power you will find 1 functions for you to refer to. This power managment ic consists of 2 channels, each of which can be used independently. As a reference, this IC power includes 8-SOIC (0.154, 3.90mm Width) functions for your convenience. There are a lot of similarities between this IC management and other Battery Backup Circuit products. As specified in the package specification, the peak reflow temperature of the package is set at 260. A supply voltage of 3.3V is used to conduct the PMIC chip. IC management is possible to find a succession of 1 voltages that have been checked. Using Surface Mount, IC management is mounted. There is a subcategory called Power Management Circuits for this power management. A total of 8 pins are located on this power management. Power managment ic pin count is 8. A voltage (Vsup) that doesn't fall below 1V as the minimum supply voltage (Vsup) should be applied to this IC power in order to ensure its proper operation. During this IC power, the maximum supply voltage (Vsup) should not exceed 5.5V volts. The recommended mounting type is Surface Mount. It is recommended to set the supervisor's temperature to this range: 0°C~70°C TA. Power management has an output of Open Drain or Open Collector during operation. As far as the supply current of the power management is concerned, it is 49μA. You can always use MAX795, the base supervisor number, to search for similar PMICs of the manufacturer. To operate this power management, you will need at least 3.3/5V volts of power.