Name: MAX795RCSA+T
Brand: Maxim Integrated
SKU: MAX795RCSA+T
Availability: InStock

Technical Specifications

Parameter Name	Value
Type	Parameter
Factory Lead Time	6 Weeks
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	8-SOIC (0.154, 3.90mm Width)
Number of Pins	8
Operating Temperature	0°C~70°C TA
Packaging	Tape & Reel (TR)
Published	2011
JESD-609 Code	e3
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	8
ECCN Code	EAR99
Type	Battery Backup Circuit
Terminal Finish	Matte Tin (Sn)
Subcategory	Power Management Circuits
Max Power Dissipation	471mW
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	1
Supply Voltage	3.3V
Base Part Number	MAX795
Output	Open Drain or Open Collector
Pin Count	8
Power Supplies	3/5V
Number of Channels	2
Max Supply Voltage	5.5V
Min Supply Voltage	1V
Operating Supply Current	49μA
Adjustable Threshold	NO
Watchdog Timer	No
Reset	Active Low
Voltage - Threshold	2.625V
Number of Voltages Monitored	1
Reset Timeout	140ms Minimum
Supply Current-Max (Isup)	0.07mA
Length	4.9mm
Width	3.9mm
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

MAX795RCSA+T Product Details

MAX795RCSA+T Overview

This power management consists of 8 mounting terminals on which it can be mounted. Packaging is in the form of a Tape & Reel (TR). In this PMIC, you can find 1 functions for your reference. There are 2 channels on this power managment ic that can be found in a series. Please refer to power management for 8-SOIC (0.154, 3.90mm Width) functions. As with other Battery Backup Circuit products, this IC management also offers a wide range of benefits. There is a specification for the peak reflow temperature of the package to be 260. The supervisor is always powered by a 3.3V volt supply. During operation, the power ic is supplied with a voltage of 1. Surface Mount mounts power management on the wall. Power Management Circuits is a subcategory of this PMIC chip. A total of 8 pins are located on this power management. 8 pins are present on the power management system. I should note that the minimum supply voltage (Vsup) for this IC management should be at least 1V, which is the minimum supply voltage that should be applied. It is recommended that the maximum supply voltage (Vsup) in this IC power be no more than 5.5V volts. Surface Mount mounting is recommended. You should set the supervisor's temperature during 0°C~70°C TA . There is an output voltage of Open Drain or Open Collector from this supervisor when it is operating. The supervisor's supply current is specified to 49μA. To find similar IC managements from the manufacturer, you can always search by MAX795. A power supply of 3/5V watts is required for the operation of this power management.