Name: MAX795RCPA+
Brand: Maxim Integrated
SKU: MAX795RCPA+
Price: 20.24000 USD
Availability: InStock

Technical Specifications

Parameter Name	Value
Type	Parameter
Factory Lead Time	6 Weeks
Mount	Through Hole
Mounting Type	Through Hole
Package / Case	8-DIP (0.300, 7.62mm)
Number of Pins	8
Operating Temperature	0°C~70°C TA
Packaging	Tube
Published	2011
JESD-609 Code	e3
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	8
ECCN Code	EAR99
Type	Battery Backup Circuit
Terminal Finish	Matte Tin (Sn)
Subcategory	Power Management Circuits
Max Power Dissipation	727mW
Terminal Position	DUAL
Peak Reflow Temperature (Cel)	260
Number of Functions	1
Supply Voltage	3V
Terminal Pitch	2.54mm
Base Part Number	MAX795
Output	Open Drain or Open Collector
Pin Count	8
Power Supplies	3/5V
Number of Channels	2
Max Supply Voltage	5.5V
Min Supply Voltage	1V
Operating Supply Current	49μA
Adjustable Threshold	NO
Watchdog Timer	No
Reset	Active Low
Voltage - Threshold	2.625V
Number of Voltages Monitored	1
Reset Timeout	140ms Minimum
Supply Current-Max (Isup)	0.07mA
Height Seated (Max)	4.572mm
Length	9.375mm
Width	7.62mm
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

MAX795RCPA+ Product Details

MAX795RCPA+ Overview

This power management consists of 8 mounting terminals on which it can be mounted. In terms of packaging, power management follows the Tube model. To assist you, this IC power includes 1 functions. Depending on the power managment ic you are looking at, you can find a total of 2 channels. In this IC management you will find 8-DIP (0.300, 7.62mm) functions for you to refer to. With power management, you get a lot of benefits that you won't find in other Battery Backup Circuit products. IC management is specified that the package peak reflow temperature should be 260. Manage ics operate at 3V supply voltages. When a supply voltage of 1 is applied to the power ic, it conducts. By Through Hole, IC management has been mounted. Power Management Circuits is a subcategory of this PMIC chip. Power management has a total of 8 pins. 8 pins are on the supervisor. IC management can only work with a supply voltage of 1V volts. This IC power should be powered by no more than 5.5V volts of supply voltage (Vsup). A Through Hole mounting type is recommended. We recommend setting the supervisors to 0°C~70°C TA degrees. While this power management is operating, it will output Open Drain or Open Collector as the output voltage. In order to maintain a stable supply current for the power management, 49μA is the recommended value. A similar IC managements number of the manufacturer can always be found by using MAX795, the base power ics number. The power management must be powered by 3/5V volts to function properly.