MAX792REPE+ Overview
This voltage supervisor has a total of 16 mounting terminals that can be used for mounting. Power management is packaged in a Tube way. Please refer to this PMIC for 1 functions. It is possible to find on this power management a series of 1 channels. There are PDIP functions included in this PMIC so that you can refer to them. There are a lot of similarities between this IC power and other Simple Reset/Power-On Reset products. There is a specification for the peak reflow temperature of the package to be 260. The supervisor is always powered by a 5V volt supply. A supply voltage of 1 is used to conduct the PMIC chip. Through Hole mounts IC management. This power ic can be sub-categorized as Power Management Circuits. 16 pins are present in total in this power management. This power management system has 16 pins. IC management can only work with a supply voltage of 2.75V volts. The supply voltage (Vsup) should not exceed 5.5V volts in this IC power. The power management's supply current is 150μA. It is necessary to have 3/5V volts of power in order for this voltage supervisor to operate. If you want to work with PMIC chip, you will need to supply PMIC chip with a temperature at least of 150μA.
MAX792REPE+ Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 2.75V
150μA operating supply current
MAX792REPE+ Applications
There are a lot of Maxim Integrated MAX792REPE+ Voltage Supervisors applications.
- Magnetic resonance imaging
- Telecommunications equipment
- DVR
- Military communications
- Utility meter
- Urban rail transit weak current power monitoring
- Medical-specific isolation transformer
- Satellite navigation
- Digitally controlled LDO regulators circuit
- Rechargeable batteries
