Name: MAX792LCSE+T
Brand: Maxim Integrated
SKU: MAX792LCSE+T
Price: 9.59000 USD
Availability: InStock

Technical Specifications

Parameter Name	Value
Type	Parameter
Factory Lead Time	6 Weeks
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	16-SOIC (0.154, 3.90mm Width)
Number of Pins	16
Operating Temperature	0°C~70°C TA
Packaging	Tape & Reel (TR)
Published	2006
JESD-609 Code	e3
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	16
ECCN Code	EAR99
Type	Simple Reset/Power-On Reset
Terminal Finish	Matte Tin (Sn)
Subcategory	Power Management Circuits
Max Power Dissipation	762mW
Technology	CMOS
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	1
Supply Voltage	3V
Base Part Number	MAX792
Output	Push-Pull, Push-Pull
Pin Count	16
Power Supplies	3/5V
Number of Channels	1
Max Supply Voltage	5.5V
Min Supply Voltage	2.75V
Operating Supply Current	150μA
Max Supply Current	150μA
Adjustable Threshold	NO
Watchdog Timer	Yes
Reset	Active High/Active Low
Voltage - Threshold	4.62V
Number of Voltages Monitored	1
Reset Timeout	140ms Minimum
Min Reset Threshold Voltage	4.5V
Max Reset Threshold Voltage	4.75V
Undervoltage Threshold	4.5V
Overvoltage Threshold	4.75V
Length	9.9mm
Width	3.9mm
Radiation Hardening	No
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

MAX792LCSE+T Product Details

MAX792LCSE+T Overview

There are 16 terminals on this power management that allow it to be mounted. Packaged in the form of a Tape & Reel (TR), power management is easy to use. Power management is possible to find a series of 1 functions. There are 1 channels on this power managment ic that can be found in a series. There are 16-SOIC (0.154, 3.90mm Width) functions included in this PMIC so that you can refer to them. Several of the benefits of this PMIC are also shared by other Simple Reset/Power-On Reset products. The package peak reflow temperature is specified to be 260. Manage ics operate at 3V supply voltages. Power ics operate at 1 supply voltages. Surface Mount mounts IC management. The power management belongs to the Power Management Circuits subcategory. In total, IC powers are 16 pins on the board. There are 16 pins on the power managment ic. Normally, the supply voltage (Vsup) for this PMIC should not be lower than 2.75V. The maximum supply voltage (Vsup) in this PMIC should not exceed 5.5V volts. Surface Mount mounting is recommended. The temperature of the supervisors should be set to this range: 0°C~70°C TA. While in operation, this supervisor has a voltage output of Push-Pull, Push-Pull. In order to maintain a stable supply current for the power management, 150μA is the recommended value. You can always use MAX792, the base supervisor number, to search for similar PMICs of the manufacturer. It is necessary to have 3/5V volts of power in order for this voltage supervisor to operate. If you want to work with PMIC chip, you will need to supply PMIC chip with a temperature at least of 150μA.