MAX7414EPA+ Overview
This product comes in the form of a 8-DIP (0.300, 7.62mm) package.As far as packaging is concerned, it comes in a Tube package.There is a type of mounting that is Through Hole for the gadget.There is a Butterworth, Low Pass Switched Capacitor filter type assigned to this part.Power sources of 2.7V~3.6V should work.A total of 19 8 pins are located on this board.Among all the components inside the device, the MAX7414 is by far the most important.There is either a cutoff or a center frequency in the device when it is operating at 15kHz frequency.Reflow reaches its peak temperature at 260 when the reflow process is completed.In order to power the component at all times, a source of 3V must be present at all times.3.6V is the point where the maximum supply voltage (Vsup) can be reached.In order for it to work properly, it should be warmer than -40°C.The maximum working temperature is currently set at 85°C.In this case, 8 will remain the pin number of the component.There is a 3V supply on the device.8 terminals are located on the device in a number of locations.The voltage of the supply, Vsup, must be larger than the voltage of the load, 2.7V.A 1 circuit is one of these circuits.With a voltage supply voltage of 3V, this DC DC switching regulator operates on a DC voltage supply.
MAX7414EPA+ Features
Supply voltage of 3V
Maximum operating temperature of 85°C
1 circuits
MAX7414EPA+ Applications
There are a lot of Maxim Integrated
MAX7414EPA+ active filters applications.
- Complex Multiply-Add
- Sample Rate Converters
- Digital Down Conversion
- D/A and A/D pre/post Filtering
- Tuning Bandwidth Expansion for HSP45116 and HSP45106
- Quadrature, Complex Flterlng
- Image Processing
- Polyphase Flterng
- Adaptive Fllterlng
- Very Narrow Band Fllters
