MAX7411CPA+ Overview
As far as packaging is concerned, it comes in a 8-DIP (0.300, 7.62mm) package.There is a Tube package that comes with it.I would like to point out that the gadget has a Through Hole mounting type.In this case, the part's filter type is Elliptic, Low Pass Switched Capacitor.I believe it should be able to work with a power source of 4.5V~5.5V, if it works at all.8-pins are used in total on this board.MAX7411 is the best component of the device, because it is the most important part of the device.There is either a cutoff or a center frequency in the device when it is operating at 15kHz frequency.As the peak reflow temperature reaches 260, the reflow process begins.There is always a source of 5V being used to power the component at all times.Filter is important that Filter is warmer than 0°C when Filter is in operation.There is currently a maximum working temperature of 70°C in the system.There is no change in the pin number of the component, as 8 remains the same.There are 5V supplies in the device.There are a number of 8 terminals present on the device.Circuits of the 1 type exist.In this DC DC switching regulator, the supply voltage will be 5V, and it will operate off of that voltage.There are two types of parts in this part.
MAX7411CPA+ Features
Supply voltage of 5V
Maximum operating temperature of 70°C
1 circuits
MAX7411CPA+ Applications
There are a lot of Maxim Integrated
MAX7411CPA+ active filters applications.
- Echo Cancellation
- Complex Multiply-Add
- Sample Rate Converters
- Digital Down Conversion
- D/A and A/D pre/post Filtering
- Tuning Bandwidth Expansion for HSP45116 and HSP45106
- Quadrature, Complex Flterlng
- Image Processing
- Polyphase Flterng
- Adaptive Fllterlng
