MAX7407EPA+ Overview
In a 8-DIP (0.300, 7.62mm) package, it is packaged.A Tube package contains it.Using Through Hole mounting, the gadget can be mounted.There is a filter type Elliptic, Low Pass Switched Capacitor associated with this part.This device should work with a power source of 2.7V~3.6V.Filter consists of a total of 8 pins.In the device's best component, there is a MAX7407.Cutoff or center frequency is 10kHz for the device.When 260 is reached, the peak reflow temperature has been reached.In order to power the component at all times, a source of 3V is required.Filter is at 3.6V that the maximum supply voltage (Vsup) reaches Filters maximum value.As it operates, it should be warmer than -40°C.The maximum working temperature at the moment is 85°C.Filter is still possible to distinguish the component by Filters pin number 8.A 3V supply is present in the device.The device contains a number of 8 terminals.Vsup must be greater than 2.7V for the supply voltage.The 1 circuit is present.A maximum supply temperature of 3.5mA is capable of being handled by this device.Switching regulator for DC DC operation runs on a supply voltage of 3V.There is a Active type part here.
MAX7407EPA+ Features
Supply voltage of 3V
Maximum operating temperature of 85°C
1 circuits
MAX7407EPA+ Applications
There are a lot of Maxim Integrated
MAX7407EPA+ active filters applications.
- Radar/Sonar
- Adaptive Filters
- Echo Cancellation
- Complex Multiply-Add
- Sample Rate Converters
- Digital Down Conversion
- D/A and A/D pre/post Filtering
- Tuning Bandwidth Expansion for HSP45116 and HSP45106
- Quadrature, Complex Flterlng
- Image Processing
