MAX7360ETL+ Overview
Sensor and detector interface is packaged with the materials of Tube.A 40-WFQFN Exposed Pad package can be used to save space.The characteristics of Controller enable it to provide superior performance.As its mounting technique, the Surface Mount technique is used.To avoid unnecessary cooling, the operating temperature should be kept at -40°C~85°C.Sensor and detector interface adopts Logic as Sensor and detector interfaces input type.Signals are prevented from reflecting off 40 terminations.Its base part number of MAX7360 can be used to locate related electronic parts.In this case, it is configured with 1 functions.This is a 40-pin type electronic device.The pins of the 40 component are designed to perform the function for which they were designed.Sensor and detector interface is mounted in the direction of Surface Mount.The efficiency of the operating supply can be improved if the operating supply current is maintained at 50μA.There will be a failure when the supply voltage exceeds 3.6V.When the supply voltage is lower than 1.62V, failures will occur.A supply voltage of 3.3V is required for its use.
MAX7360ETL+ Features
operate temperature at the range of 50μA
MAX7360ETL+ Applications
There are a lot of Maxim Integrated MAX7360ETL+ applications of sensor and detector interfaces.
- Mobile Devices
- Engine Knock Detector Signal Processing
- Generator/alternator monitoring and control
- Resistive Elements Sensors
- Vehicle Speed VRS Interfaces
- sensing
- Window Lifters
- Large Tank Level Sensing
- Displacement Sensing
- Simple bus-controlled part for remote control and
