MAX7219C/D Overview
The package follows the same design pattern as Tray.Transmission lines are terminated with 24 terminations using devices whose characteristic impedance matches that of the transmission line.There are a total of 21 24 pins on the device.There is a voltage of 5V applied to the supply voltage of this device.64 segments refer to the segment of any of the Seller Group's equipment solutions business known as "Electronics".The same can also be done with Display Drivers.To ensure high efficiency, the supply voltage should be maintained at 5.5V.Due to its two 5V power supplies, it can run anywhere in the world.As soon as the maximum current is supplied for its operation, the voltage reaches 330mA.Additionally, the letter COMMON-CATHODE identifies it.Temperatures lower than 70°C are recommended for operation.For the purpose of operation, a temperature greater than 0°C should be used.The type of interface IC for this electrical part is LED DISPLAY DRIVER, which is used to control and manage the sharing of information between the electronic devices.
MAX7219C/D Features
24 pin count
5V power supplies
MAX7219C/D Applications
There are a lot of Maxim Integrated
MAX7219C/D display drivers applications.
- Relay Driver
- Digital Clock, Thermometer, Counter, Voltmeter
- Instrumentation Readouts
- Instrumentation
- Test Equipment
- Hand Held Instruments
- Bargraph Dlsplays
- Numerlc and Non-Numerlc Panel Dlsplays
- High and Low Temperature Envlronment s where LCD
- Dlsplay Integrtty ls Compromissd
