Name: MAX708SCUA+
Brand: Maxim Integrated
SKU: MAX708SCUA+
Price: 7.97000 USD
Availability: InStock

Technical Specifications

Parameter Name	Value
Type	Parameter
Factory Lead Time	6 Weeks
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	8-TSSOP, 8-MSOP (0.118, 3.00mm Width)
Number of Pins	8
Operating Temperature	0°C~70°C TA
Packaging	Tube
Published	2010
JESD-609 Code	e3
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	8
ECCN Code	EAR99
Type	Simple Reset/Power-On Reset
Terminal Finish	Matte Tin (Sn)
Additional Feature	MANUAL RESET, POWER FAIL COMPARATOR
Subcategory	Power Management Circuits
Max Power Dissipation	362mW
Technology	CMOS
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	1
Supply Voltage	3V
Terminal Pitch	0.65mm
Base Part Number	MAX708
Output	Push-Pull, Push-Pull
Pin Count	8
Power Supplies	3.3/5V
Number of Channels	1
Max Supply Voltage	5.5V
Min Supply Voltage	1V
Operating Supply Current	135μA
Adjustable Threshold	NO
Watchdog Timer	No
Reset	Active High/Active Low
Voltage - Threshold	2.93V
Number of Voltages Monitored	1
Reset Timeout	140ms Minimum
Supply Current-Max (Isup)	0.35mA
Min Reset Threshold Voltage	2.85V
Max Reset Threshold Voltage	3V
Undervoltage Threshold	2.85V
Overvoltage Threshold	3V
Length	3mm
Width	3mm
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

MAX708SCUA+ Product Details

MAX708SCUA+ Overview

Power management is mounted through 8 terminals. There is a Tube-packaging method applied to IC management. There are 1 functions included in this PMIC so that you can refer to them. There are 1 channels on this power managment ic that can be found in a series. To assist you, this PMIC includes 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) functions. With power management, you get a lot of benefits that you won't find in other Simple Reset/Power-On Reset products. Specifies a reflow peak temperature of 260 for the package during reflow. IC management conducts in a 3V-voltage supply. A supply voltage of 1 is used to conduct the PMIC chip. By Surface Mount, IC management has been mounted. Power Management Circuits is a subcategory of this PMIC chip. Taking into account all of the pins, this power management has a total of 8. 8 pins are on the supervisor. It is recommended that Vsup should not be less than 1V for this IC power. During this IC power, the maximum supply voltage (Vsup) should not exceed 5.5V volts. The recommended mounting type for IC management is Surface Mount. We recommend setting the supervisors to 0°C~70°C TA degrees. There is an output voltage of Push-Pull, Push-Pull from this supervisor when it is operating. Supplied with a operating current of 135μA, this PMIC is capable of fully function as specified. Power management is also possible to add other features such as MANUAL RESET, POWER FAIL COMPARATOR to name a few. It is always advisable to use MAX708, the base supervisor number, when searching for similar PMICs from the manufacturer. To operate this power management, you will need at least 3.3/5V volts of power.