MAX708SCSA+T Overview
This power management consists of 8 mounting terminals on which it can be mounted. Power management is packaged in a Tape & Reel (TR) way. There are 1 functions included in this PMIC so that you can refer to them. This power managment ic consists of 2 channels, each of which can be used independently. In this PMIC, you can find 8-SOIC (0.154, 3.90mm Width) functions for your reference. There are a number of benefits that this PMIC has in common with other Simple Reset/Power-On Reset manage ics. According to the specification, the package's peak reflow temperature is specified to be 260. In a 3V supply voltage, the power management conducts. During operation, the power ic is supplied with a voltage of 1. Surface Mount mounts IC management. In this case, this PMIC chip can be sub-categorized as a Power Management Circuits chip. In total, the power management has 8 pins in it. The pins of the power management system count 8. I should note that the minimum supply voltage (Vsup) for this IC management should be at least 1V, which is the minimum supply voltage that should be applied. The maximum supply voltage (Vsup) in this PMIC should not exceed 5.5V volts. The recommended mounting type is Surface Mount. The supervisors should be set to the following temperature: 0°C~70°C TA. While this power management is operating, it will output Push-Pull, Push-Pull as the output voltage. It is estimated that the voltage supervisor's supply current is 135μA. In addition, IC management are other features such as [0], to mention only a few. For similar manage ics search of the manufacturer, you can always refer to MAX708, the base PMIC number. In order to operate this power management, it requires 3.3/5V volts of power.
MAX708SCSA+T Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
135μA operating supply current
MAX708SCSA+T Applications
There are a lot of Maxim Integrated MAX708SCSA+T Voltage Supervisors applications.
- Set top box
- Urban rail transit weak current power monitoring
- Data storage applications
- Digitally controlled LDO regulators circuit
- Utility meter
- Battery cars
- Analog circuit
- Power distribution systems of ICU
- Consumer electronics
- Military electronics
