MAX706PMJA Overview
As far as the mounting terminals of this voltage supervisor are concerned, it has 8 in total. Packaging is in the form of a Bulk. In this IC power you will find 1 functions for you to refer to. Depending on the power managment ic you are looking at, you can find a total of 1 channels. In this IC management you will find CDIP functions for you to refer to. In order to ensure a good reflow performance, the package peak reflow temperature must be set at 245. A supply voltage of 3V is used to conduct the PMIC chip. Through Hole is the one that mounts power management. There is a subcategory called Power Management Circuits for this power management. In total, the power management has 8 pins in it. This power management system has 8 pins. A voltage (Vsup) that doesn't fall below 1.2V as the minimum supply voltage (Vsup) should be applied to this IC power in order to ensure its proper operation. The supply voltage (Vsup) should not exceed 5.5V volts in this IC power. Supervisors are also additional features, such as [0] for example, which are worth mentioning. Besides the IC types mentioned above, the power management system also includes other types such as POWER SUPPLY MANAGEMENT CIRCUIT. It requires 5V watts of power to operate this voltage supervisor.
MAX706PMJA Features
Minimum supply voltage of 1.2V
MAX706PMJA Applications
There are a lot of Maxim Integrated
MAX706PMJA Voltage Supervisors applications.
- External alarm
- Display equipment
- DC stabilized power supply module
- Insulation fault location system
- Magnetic resonance imaging
- Stable power system
- Sensitive sensors
- Efficient information transmission
- Functional modules
- Consumer electronics
