MAX706ESA+T Overview
A total of 8 terminals are used to mount this power management. Packaging is in the form of a Tape & Reel (TR). There are 1 functions included in this PMIC so that you can refer to them. Depending on the power managment ic you are looking at, you can find a total of 2 channels. IC management is packaged as a 8-SOIC (0.154, 3.90mm Width) package. It is a IC power that shares many benefits with other products from the Simple Reset/Power-On Reset line. Specifies a reflow peak temperature of 260 for the package during reflow. A supply voltage of 5V is used to conduct the PMIC chip. In a 1 supply voltage, the PMIC chip conducts. Surface Mount mounts IC management. It is possible to subcategorize this power ic as a Power Management Circuits chip. In total, it has 8 pins on IC management. There are 8 pins on the power managment ic. IC management can only work with a supply voltage of 1.2V volts. Voltage (Vsup) shouldn't exceed 5.5V volts in this PMIC. The recommended mounting type is Surface Mount. It is recommended that the supervisor be set to this temperature: -40°C~85°C TA. While this power management is operating, it will output Push-Pull, Totem Pole as the output voltage. For this power management, there is an 500μA volt supply current. It is always advisable to use MAX706, the base supervisor number, when searching for similar PMICs from the manufacturer. It requires 5V watts of power to operate this voltage supervisor. A maximum supply temperature of 500μA can be used with this power management.
MAX706ESA+T Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1.2V
500μA operating supply current
MAX706ESA+T Applications
There are a lot of Maxim Integrated MAX706ESA+T Voltage Supervisors applications.
- Refrigeration
- Set top box
- Dash board
- Kitchen appliances
- Battery cars
- Multi-voltage system
- Computer applications
- Military electronics
- Smartphones
- WiFi router
