MAX706APEPA+ Overview
There are 8 terminals on this power management that allow it to be mounted. Tube-packaging is used. Please find attached 8-DIP (0.300, 7.62mm) functions for your reference in this IC power. As with other Simple Reset/Power-On Reset products, this IC management also offers a wide range of benefits. During operation, the power ic is supplied with a voltage of 1. Power management is included in the Through Hole mount. In this case, this PMIC chip can be sub-categorized as a Power Management Circuits chip. It is recommended that the minimum supply voltage (Vsup) for this IC management should not be less than 1.2V volts. There should be no more than 5.5V volts of maximum supply voltage (Vsup) in this power management. In this case, Through Hole is the recommended mounting type. The supervisors should be set to the following temperature: -40°C~85°C TA. During operation, this power management system outputs Push-Pull, Totem Pole. It is always advisable to use MAX706, the base supervisor number, when searching for similar PMICs from the manufacturer. In order to operate this power management, it requires 3/5V volts of power.
MAX706APEPA+ Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1.2V
MAX706APEPA+ Applications
There are a lot of Maxim Integrated MAX706APEPA+ Voltage Supervisors applications.
- Functional modules
- Digitally controlled LDO regulators circuit
- Urban rail transit weak current power monitoring
- Radio
- Electrical fire monitoring system
- Important electronics for automotive safety
- Power distribution systems of CCU
- Kitchen appliances
- Embedded computing
- Battery-powered equipment
