MAX705CPA Overview
There are 8 terminals on this power management that allow it to be mounted. A Tube package is used to package the power management. There are 1 functions included in this PMIC so that you can refer to them. There are 2 channels on this power managment ic that can be found in a series. There are 8-DIP (0.300, 7.62mm) functions included in this PMIC so that you can refer to them. It is a IC power that shares many benefits with other products from the Simple Reset/Power-On Reset line. Specifies a reflow peak temperature of 245 for the package during reflow. A supply voltage of 5V is used to conduct the PMIC chip. Power ics operate at 1 supply voltages. As a subcategory, this PMIC chip can be categorized as Power Management Circuits. In total, IC powers are 8 pins on the board. A Through Hole mounting type is recommended. The supervisors should be set to the following temperature: 0°C~70°C TA. During operation, this power management system outputs Push-Pull, Totem Pole. You can always use MAX705, the base supervisor number, to search for similar PMICs of the manufacturer. The voltage supervisor requires a power source of 5V volts in order to work correctly.
MAX705CPA Features
Simple Reset/Power-On Reset type
MAX705CPA Applications
There are a lot of Maxim Integrated MAX705CPA Voltage Supervisors applications.
- Radar
- Stable power system
- Functional modules
- Satellite navigation
- Sensitive sensors
- Automotive power systems
- Medical-specific insulation monitor
- Detection of phase loss
- emergency room
- Electronics installed in the vehicle
