Welcome to Hotenda.com Online Store!

logo
userjoin
Home

MAX703ESA+T

MAX703ESA+T

MAX703ESA+T

Maxim Integrated

5V8 Terminals 8-Pin MAX703 Voltage supervisor1 Channels Min 0V Max 5.5V

SOT-23

MAX703ESA+T Datasheet PDF

non-compliant

Technical Specifications

Parameter NameValue
TypeParameter
Factory Lead Time 6 Weeks
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 8-SOIC (0.154, 3.90mm Width)
Number of Pins 8
Operating Temperature-40°C~85°C TA
PackagingTape & Reel (TR)
Published 2010
JESD-609 Code e3
Pbfree Code yes
Part StatusActive
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 8
ECCN Code EAR99
Type Battery Backup Circuit
Terminal Finish Matte Tin (Sn)
Subcategory Power Management Circuits
Max Power Dissipation471mW
Technology CMOS
Terminal Position DUAL
Terminal FormGULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Supply Voltage 5V
Base Part Number MAX703
Output Push-Pull, Totem Pole
Pin Count8
Power Supplies5V
Number of Channels 1
Max Supply Voltage5.5V
Min Supply Voltage0V
Operating Supply Current 500μA
Max Supply Current 500μA
Adjustable Threshold NO
Watchdog TimerNo
Reset Active Low
Voltage - Threshold 4.65V
Number of Voltages Monitored1
Reset Timeout 140ms Minimum
Min Reset Threshold Voltage 4.5V
Max Reset Threshold Voltage 4.75V
Undervoltage Threshold4.5V
Overvoltage Threshold4.75V
Length 4.9mm
Width 3.9mm
RoHS StatusROHS3 Compliant
Lead Free Lead Free
In-Stock:1579 items

Pricing & Ordering

QuantityUnit PriceExt. Price

MAX703ESA+T Product Details

MAX703ESA+T Overview


As far as the mounting terminals of this voltage supervisor are concerned, it has 8 in total. Packaged in the form of a Tape & Reel (TR), power management is easy to use. Please find attached 1 functions for your reference in this IC power. This power management is made up of 1 channels which are available in a series format. To assist you, this PMIC includes 8-SOIC (0.154, 3.90mm Width) functions. There are a lot of similarities between this IC power and other Battery Backup Circuit products. In order to ensure a good reflow performance, the package peak reflow temperature must be set at 260. A supply voltage of 5V is used to conduct the PMIC chip. When a supply voltage of 1 is applied to the power ic, it conducts. The power management is mounted by Surface Mount. As a subcategory, this PMIC chip can be categorized as Power Management Circuits. In total, the power management has 8 pins in it. Power managment ic pin count is 8. In order for this PMIC to work correctly, the minimum supply voltage (Vsup) should be greater than 0V. The maximum supply voltage (Vsup) in this PMIC should not exceed 5.5V volts. The mounting type of the supervisors is Surface MountIt is recommended that the supervisor be set to this temperature: -40°C~85°C TA. While this power management is operating, it will output Push-Pull, Totem Pole as the output voltage. The supervisor's supply current is specified to 500μA. To find similar IC managements from the manufacturer, you can always search by MAX703. In order to operate this power management, it requires 5V volts of power. If you want to work with PMIC chip, you will need to supply PMIC chip with a temperature at least of 500μA.

MAX703ESA+T Features


Battery Backup Circuit type
Minimum supply voltage of 0V
500μA operating supply current

MAX703ESA+T Applications


There are a lot of Maxim Integrated MAX703ESA+T Voltage Supervisors applications.

  • Dash board
  • Power communication system
  • Digitally controlled LDO regulators circuit
  • Detection of phase loss
  • Fire equipment power monitoring system
  • Medical-specific isolation transformer
  • Power distribution systems of infant care room
  • Smart meter
  • Battery cars
  • Refrigeration

Get Subscriber

Enter Your Email Address, Get the Latest News