Name: MAX703EPA+
Brand: Maxim Integrated
SKU: MAX703EPA+
Price: 6.60000 USD
Availability: InStock

Technical Specifications

Parameter Name	Value
Type	Parameter
Factory Lead Time	6 Weeks
Mount	Through Hole
Mounting Type	Through Hole
Package / Case	8-DIP (0.300, 7.62mm)
Number of Pins	8
Operating Temperature	-40°C~85°C TA
Packaging	Tube
Published	2006
JESD-609 Code	e3
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	8
ECCN Code	EAR99
Type	Battery Backup Circuit
Terminal Finish	Matte Tin (Sn)
Subcategory	Power Management Circuits
Max Power Dissipation	727mW
Technology	CMOS
Terminal Position	DUAL
Peak Reflow Temperature (Cel)	260
Number of Functions	1
Supply Voltage	5V
Terminal Pitch	2.54mm
Base Part Number	MAX703
Output	Push-Pull, Totem Pole
Pin Count	8
Power Supplies	5V
Number of Channels	1
Max Supply Voltage	5.5V
Min Supply Voltage	0V
Operating Supply Current	500μA
Max Supply Current	500μA
Adjustable Threshold	NO
Watchdog Timer	No
Reset	Active Low
Voltage - Threshold	4.65V
Number of Voltages Monitored	1
Reset Timeout	140ms Minimum
Min Reset Threshold Voltage	4.5V
Max Reset Threshold Voltage	4.75V
Undervoltage Threshold	4.5V
Overvoltage Threshold	4.75V
Height Seated (Max)	4.572mm
Length	9.375mm
Width	7.62mm
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

MAX703EPA+ Product Details

MAX703EPA+ Overview

This power management consists of 8 mounting terminals on which it can be mounted. Tube-packaging is used. As a reference, this IC management includes 1 functions for your convenience. This power management is made up of 1 channels which are available in a series format. The purpose of this IC power is to provide you with a reference of 8-DIP (0.300, 7.62mm) functions. There are many benefits that this IC power shares with other Battery Backup Circuit products as well. There is a specification for the peak reflow temperature of the package to be 260. The supervisor is always powered by a 5V volt supply. Power ics operate at 1 supply voltages. The mount is provided by Through Hole. There is a subcategory called Power Management Circuits for this power management. In total, IC powers are 8 pins on the board. 8 pins are present on the power management system. In order for this PMIC to work correctly, the minimum supply voltage (Vsup) should be greater than 0V. Voltage (Vsup) shouldn't exceed 5.5V volts in this PMIC. The recommended mounting type for IC management is Through Hole. The temperature of the supervisors should be set to this range: -40°C~85°C TA. There is an output voltage of Push-Pull, Totem Pole from this supervisor when it is operating. In order to maintain a stable supply current for the power management, 500μA is the recommended value. If you want to search for similar IC managements of this manufacturer, you can always refer to MAX703, which is the base power ics number. There is a requirement for 5V power to power this power management. At the most, voltage supervisor can work with a supply temperature of 500μA.