MAX699EWE+T Overview
A total of 16 terminals are used to mount this power management. In terms of packaging, power management follows the Tape & Reel (TR) model. Please refer to this PMIC for 1 functions. There are 1 channels available on this supervisor, and each channel has a different function. There are 16-SOIC (0.295, 7.50mm Width) functions included in this PMIC so that you can refer to them. As with other Simple Reset/Power-On Reset products, this IC management also offers a wide range of benefits. Specifies a reflow peak temperature of 260 for the package during reflow. A supply voltage of 3V is used to conduct the PMIC chip. IC management is possible to find a succession of 1 voltages that have been checked. Power management is included in the Surface Mount mount. In this case, this PMIC chip can be sub-categorized as a Power Management Circuits chip. Taking into account all of the pins, this power management has a total of 16. It is recommended that the minimum supply voltage (Vsup) for this IC management should not be less than 3V volts. The maximum supply voltage (Vsup) in this PMIC should not exceed 5.5V volts. The recommended mounting type for IC management is Surface Mount. The temperature of the supervisors should be set to this range: -40°C~85°C TA. Power management has an output of Open Drain, Push-Pull during operation. In order to maintain a stable supply current for the power management, 5mA is the recommended value. Power management is also possible to add other features such as WATCHDOG TIMER to name a few. A similar IC managements number of the manufacturer can always be found by using MAX699, the base power ics number. It requires 3.3/5V watts of power to operate this voltage supervisor. Voltage supervisor can work with a supply temperature of 5mA at the most.
MAX699EWE+T Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 3V
5mA operating supply current
MAX699EWE+T Applications
There are a lot of Maxim Integrated MAX699EWE+T Voltage Supervisors applications.
- WiFi router
- Telecommunications equipment
- Leakage current detection
- Stable power system
- Power distribution systems of operating room
- Electronics installed in the vehicle
- Power distribution systems of ICU
- Smart meter
- Power communication system
- Detection of phase sequence
