MAX6971ANG+ Overview
To save space on the board, it has a 24-DIP (0.300, 7.62mm) package. There are 16 outputs used for the design of this LED drivers.In order to mount the led light driver, Through Hole is used.In this case, the Linear emerges as highly efficient and reliable.It is possible for the led light driver to operate at a temperature of -40°C~125°C TA.There are considerable benefits for Lighting, Signage.The operation of this system is supported by 24 terminations.To form its configuration, 24 pins are used.A total of 32 segments are estimated.Through Hole is mounted on it.It is under the base part number MAX6971 that you can find this LED driver.There is 36V voltage output from this device.It is equipped with 24 pin count.Furthermore, it can be classified as Display Drivers based on its characteristics.The minimum input voltage for this device is 3V.5.5V is the maximum value of supply current that can be used.A minimal supply current is required in order for this device to provide high efficiency.Loads can only be powered by 55mA current.There is 5.5V internal voltage required to power systems.This electronic component can fully perform when the switching frequency is 5MHz.
MAX6971ANG+ Features
Available in the 24-DIP (0.300, 7.62mm) package
Operating temperature of -40°C~125°C TA
Supply voltage of 3.3V
Operating with the supply voltage of 5.5V
Switching frequency of 5MHz
MAX6971ANG+ Applications
There are a lot of Maxim Integrated MAX6971ANG+ LED Driver ICs applications.
- Street lighting
- Portable lighting
- LED Lighting PFCs, Linear Dimmable
- Sports Facility Lighting
- OLED power supply for portable equipment
- General LED Lighting: Down-lights, Base-lights, Ceiling Lights, Exterior Lights
- A- lamps
- Dimmable LED for vehicle interiors
- Auxiliary lights for on-vehicle cameras
- White LED Backlight for portable equipment
