MAX6958AAPE+ Overview
The package follows the same design pattern as Tube.There is a version 16-DIP (0.300, 7.62mm) of the package that includes it as part of it.The type of display used in this electrical device is LED.This electronic component is mounted on the board using the Through Hole axis.Display drivers is recommended that this electrical part be operated at a temperature of -40°C~125°C.As long as you use a 3V~5.5VV power source, it should work.Transmission lines are terminated with 16 terminations using devices whose characteristic impedance matches that of the transmission line.One of the members of the MAX6958 family of devices is this device.There are a total of 21 16 pins on the device.As a matter of fact, it has 16 pins installed.As this electronic component is mounted on the board using the Through Hole axis, we can adjust the position of the component.There is a voltage of 5V applied to the supply voltage of this device.To ensure that 5.9mA plays its full role, the supply current must be provided so that the function of 5.9mA can be accomplished.36 segments refer to the segment of any of the Seller Group's equipment solutions business known as "Electronics".The same can also be done with Display Drivers.To ensure high efficiency, the supply voltage should be maintained at 5.5V.Due to its two 3.3/5V power supplies, it can run anywhere in the world.As soon as the maximum current is supplied for its operation, the voltage reaches 6.7mA.Additionally, the letter COMMON-CATHODE identifies it.
MAX6958AAPE+ Features
16-DIP (0.300, 7.62mm) package
MAX6958 family
16 pin count
16 pins
3.3/5V power supplies
MAX6958AAPE+ Applications
There are a lot of Maxim Integrated
MAX6958AAPE+ display drivers applications.
- Relay Driver
- Digital Clock, Thermometer, Counter, Voltmeter
- Instrumentation Readouts
- Instrumentation
- Test Equipment
- Hand Held Instruments
- Bargraph Dlsplays
- Numerlc and Non-Numerlc Panel Dlsplays
- High and Low Temperature Envlronment s where LCD
- Dlsplay Integrtty ls Compromissd
