Name: MAX692EPA+
Brand: Maxim Integrated
SKU: MAX692EPA+
Price: 12.28000 USD
Availability: InStock

Technical Specifications

Parameter Name	Value
Type	Parameter
Factory Lead Time	6 Weeks
Mount	Through Hole
Mounting Type	Through Hole
Package / Case	8-DIP (0.300, 7.62mm)
Number of Pins	8
Operating Temperature	-40°C~85°C TA
Packaging	Tube
Published	2006
JESD-609 Code	e3
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	8
ECCN Code	EAR99
Type	Battery Backup Circuit
Terminal Finish	Matte Tin (Sn)
Subcategory	Power Management Circuits
Max Power Dissipation	400mW
Technology	CMOS
Terminal Position	DUAL
Peak Reflow Temperature (Cel)	260
Number of Functions	1
Supply Voltage	5V
Terminal Pitch	2.54mm
Base Part Number	MAX692
Output	Push-Pull, Totem Pole
Pin Count	8
Power Supplies	5V
Number of Channels	1
Max Supply Voltage	5.5V
Min Supply Voltage	4.5V
Operating Supply Current	10mA
Max Supply Current	10mA
Adjustable Threshold	NO
Watchdog Timer	Yes
Reset	Active Low
Voltage - Threshold	4.4V
Number of Voltages Monitored	1
Reset Timeout	35ms Minimum
Min Reset Threshold Voltage	4.25V
Max Reset Threshold Voltage	4.5V
Undervoltage Threshold	4.25V
Overvoltage Threshold	4.5V
Height Seated (Max)	4.572mm
Length	9.375mm
Width	7.62mm
Radiation Hardening	No
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

MAX692EPA+ Product Details

MAX692EPA+ Overview

This power management consists of 8 mounting terminals on which it can be mounted. There is a Tube-packaging method applied to IC management. In this PMIC, you can find 1 functions for your reference. Power management consists of 1 channels, each of which can be used independently. There are 8-DIP (0.300, 7.62mm) functions included in this PMIC so that you can refer to them. There are a lot of similarities between this IC power and other Battery Backup Circuit products. Specifies a reflow peak temperature of 260 for the package during reflow. When a supply voltage of 5V is applied to the power ic, it conducts. IC management is possible to find a succession of 1 voltages that have been checked. Using Through Hole, IC management is mounted. The power management belongs to the Power Management Circuits subcategory. The total number of pins on this power management is 8. 8 pins make up the power management. Normally, the supply voltage (Vsup) for this PMIC should not be lower than 4.5V. This IC power should be powered by no more than 5.5V volts of supply voltage (Vsup). A Through Hole mounting type is recommended. The supervisors should be set to the following temperature: -40°C~85°C TA. Power management has an output of Push-Pull, Totem Pole during operation. The supply current of the power management is 10mA. It is always advisable to use MAX692, the base supervisor number, when searching for similar PMICs from the manufacturer. There is a requirement for 5V power to power this power management. The maximum supply temperature voltage supervisor can handle is 10mA.