MAX691AMJE/883B Overview
It is mounted through 16 terminals on the power management. There are 1 functions included in this PMIC so that you can refer to them. It is possible to find on this power management a series of 1 channels. There are CDIP functions included in this PMIC so that you can refer to them. IC management is specified that the package peak reflow temperature should be 245. During operation, the power ic is supplied with a voltage of 5V. Using Through Hole, IC management is mounted. In total, IC powers are 16 pins on the board. 16 pins make up the power management. In order for this PMIC to work correctly, the minimum supply voltage (Vsup) should be greater than 0V. Voltage (Vsup) shouldn't exceed 5.5V volts in this PMIC. It is also possible to use other types of IC, such as POWER SUPPLY MANAGEMENT CIRCUIT, in this supervisor. There is a requirement for 5V power to power this power management. The maximum supply temperature that PMIC chip can work with is 100μA.
MAX691AMJE/883B Features
Minimum supply voltage of 0V
MAX691AMJE/883B Applications
There are a lot of Maxim Integrated
MAX691AMJE/883B Voltage Supervisors applications.
- Power distribution systems of CCU
- emergency room
- Medical-specific isolation transformer
- Medical-specific insulation monitor
- Transformer load monitoring equipment
- External alarm
- Display equipment
- DC stabilized power supply module
- Insulation fault location system
- Magnetic resonance imaging
